UL Approved Industrial Heater Silicone Rubber Electric Heating Pad
Features and Benefits:
| |
Silicone Heater |
| Temperature Rating |
-58F to 482F (-50C – 250 C) |
| shapes |
Square, rectangular, round and customized shapes |
| Wattage density |
up to 45W/SQ.in. (7W/cm2) for certain application |
| Dielectric strength |
1200 VAC |
| Thickness range |
0.030 in. to 0.060 in. (0.762mm to 1.524mm) |
| Size |
up to 36 X 120 in. (914mm X 3048 mm) |
| certification |
UL certification is available |
| Application |
Medtech & Healthcare |
| Aerospace & Military |
| Automotive & Transportation |
| Surveillance |
| Tank & Vessel Heating |
| Food & Beverage |
| Industrial |
| Printing & Copying |
Electronics & Semi-conduct
|
Appliaction
Industrial Heater Silicone Rubber Electric Heating Pad
1) Thermal transfer equipment;
2) Prevent condensation in motors or instrument cabinets;
3) Freeze or condensation prevention in housings containing electronic equipment, for examples: traffic signal boxes, automatic teller machines, temperature control panels, gas or liquid control valve housings
4) Composite bonding processes
5) Semiconductor process heating
6) Food processing equipment
7) Airplane engine heaters and aerospace industry
8) Drums and other vessels and viscosity control and asphalt storage
9) Medical equipment such as blood analyzers, medical respirators, test tube heaters, etc.
10) Curing of plastic laminates
11) Computer peripherals such as laser printers, duplicating machines
NOTE: If the above parameters is not suitable for you,we can customize according to your voltage, size, power and so on.
Selection and Mounting methods:
On continuous dry conditions or surface heating transfer, watt density must be less than 0.6 W/cm2; on noncontinuousdry conditions watt density may be released up to 0.9 W/cm2
Mounting:
Two types:Tape bonding and RTVbonding, normally working temperature is below 100℃. If working temperature is>100℃ and<150℃,RTV bonding is the only mount method.
